Did you know we manufacture Apexior products?

Apexior 1 - The single component, boiling water/steam immersion coating for up to 700F (371C)

Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.

• Air dries, easy to apply
• Excellent wettability properties
• Easily re-coatable
• Resistant to boiling water/steam to 700°F
• Increases heat transfer efficiency
• Outstanding resistance to thermal shock (immersion)
• Inert to water treatment
• Prevents corrosion in standby service
• Prevents scale buildup
• Surface tolerant features

We also offer Apexior 3 - A single component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)